Nikon coolpix L100 Repair Manual page 48

< Caution for starting program >
・Before starting this program, close all the other running applications. Otherwise, the program may not run
properly.
When the inspection & adjustment software is started for the first time, the below window will be displayed on
the monitor for typing in the user key. (ref. TIE -07023-1)
If the user key is input correctly, the adjustment screen will appear.
Caution: Once the user key has been input, the below screen will not be displayed from the next time.
< Caution for starting DSC calibration software >
ONLY "PTP" is available for the USB connection.
Only in case of "Windows2000" operating system, it may require the install of the USB driver. In this case,
use the file of INF folder,
where the DSC calibration software exists,
- A ･ L100 -
then perform the installation.
1.62
INC
VMA43007-R.3780.A