Nikon coolpix L100 Repair Manual page 37

・ Tighten the two screws (#203). ( the battery holes must be complete round as below.)
・ Solder the battery contact PCB (#153).
・ Attach the double-stick tape (#145) based on the reference position.
・ Place the condenser unit (#144) by fitting its PCB in the groove (see the below "
Reference position
Solder
#145
Place condenser here to
be attached.
- A1 ･ L100 -
#203
INC
VMA43007-R.3780.A
").
□
#144