Nikon coolpix L100 Repair Manual page 60

7-6. Lens adjustment (Infinity)
Caution: Be sure to finish the procedure of the lens adjustment (1.5m) before this adjustment.
Use a tripod to set up the camera.
・ Turn the camera on.
・ Set the mode dial to "AUTO" and "VR" to "OFF".
Connect the one side of the
USB cable to the camera
(without connecting the
other side to the PC).
・ With the power of the camera being ON, connect the USB cable to the PC.
・ Start the DSC calibration software.
・ Select "Infinity Cal" from "Test" pull-down menu. The adjustment will start automatically.
・ After the adjustment is completed, the result will appear. If "NG" is displayed in the next line after "
", make readjustment.
calibration
・ Turn the camera OFF.
Changed Page
△× 1
At TELE-end zoom position, check
on the LCD monitor so that the
center of the Siemens star chart
(inside the collimator) coincides with
the center of the camera screen.
- A36･L100 -
Camera
Collimator (J63090)
At TELE-end zoom position,
place the camera and cllimator to the
closest to the collimator.
Result of adjustment
INC
VMA43007-R.3780.A
collimator
△(Revision)
Infinity
March.6.2009