DISASSEMBLY
Notes:
① Remove the battery prior to disassembly.
② During disassembly, make a note of the routing of the cords, which screws are
mounted in which parts, etc.
③ Electrical parts must be grounded since they are easily damaged by static.
REAR COVER, FRONT COVER
• Open the battery cover.
• Remove the 6 pieces of the screws ① (M1.7×4).
• Remove the 5 pieces of the screws ② (M1.7×4.5).
• Lift up the front cover by setting up from the bottom side.
• Remove the hook as pushing the section shown in the diagram with your finger, and then remove the back
cover.
• Disconnect the FPC ③ connector.
• Remove the stand ④ while carefully removing the front cover.
Then disconnect the FPC ⑤ from the connector.
②
Front cover
Battery cover
�������
�
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
��������������������������������������������������
④
FPC ③
①
①
- D1 ・ E4300 -
FPC ⑤
②
①
VAA12901-R.3594.A
Back cover