Dryer Motor - Asko TL751 XXLW Service Manual

1. Function
• The motor rotates the drum using the belt as well as the fan to exhause humid air.
• This is a shunt AC motor. When the motor begins to run, a centrifugal switch shorts out the operation
coil.
• The centrifugal switch also supplies power to the heater. Thus, if the motor stops, the heater goes off
also.
Fan connection axis
2. Specification
• Shunt type 1/3 HP AC motor with centrifugal switch
• Rotational speed : more than 1600 rpm with load
• No load : 190W, 4.9A at 120V• Type name : 60T
• Full load : 555W, 6.1A at 120V
• Type name : S58NXSDD-6989
3. Checking method of malfunction
• If the drum rotates and exhaust air is expelled as soon as you start the unit, the motor is in normal
operation.
• If the drum fails to rotate;
1 Remove the top plate and check if the belt is damaged.
2 Check if the door switch is in normal operation.
3 Remove the drum and check the thermostat fan.
4 Check the belt switch.
5 Run the unit while you press the lid of the belt switch and see if the motor starts operating.
• If a fault is found in any part mentioned above, replace it and check the operation of the motor (5).
• If no fault is found but the motor still fails to operate5, replace the motor.

Dryer motor

Belt operation axis
44
Part Code : 36189L5D00
Fan connection
Belt assembly