Asko TL751 XXLW Service Manual page 26

2-8. TEST Mode
1) PCB TEST MODE
A. How to enter the mode: Turn the power on while pressing Dry Sensor and Temp. buttons.
B. Operation order : check load by pressing Dry Time button continually.
No. Operation Load
1 F PCB LED ALL On
2 Humidity sensor check
3 Temp sensor check
4 Door S/W check
5 Motor check
6 Heater-Outer check
7 Heater-Inner check
8 Power off
Total time
Fixed resistance of the temp sensor : 1.7 KΩ
2) TEST MODE
A. How to enter the mode: Turn the power on while pressing Dry Sensor and Dry Time buttons.
B. Operation order: check load by pressing Dry Time button continually.
No. Operation Load
1 Motor On
2 Heater 1 on
3 Heater 2 on
4 Heater 1, Heater 2 off
5 Humidity sensor check
6 Temp sensor check
Open the door at 6th pressing
Press the start button
after closing the door.
Power off
Total time
Time (Sec) DISPLAY
6.0 ALL LED
2.0 1 : xx
2.0 2 : xx
2.0 dc --> do
2.0
2.0 H1
2.0 H2
0.3 F
18 seconds
Time (Sec) DISPLAY
0.5 1 : nr
0.5 2 : H1
0.5 3 : H2
0.5 4 : nr
1.0 5 : number
0.5 6 : number
0.5 6:00
0.5 6: number (Motor on)
0.3 Power section
About 5 seconds
25
Miscellaneous
Miscellaneous
Current : 13A
Current : 23.5A
Check based on the
variations of numbers
Surrounding temp indicated
Motor off
Door S/W check