Lamp Assembly - Asko TL751 XXLW Service Manual

1. Function
• This is a lamp assembled with its bracket and window.
• If the user opens the door, the door switch gives electric power to this
lamp and it turns on.
2. Specification
• An assembly of an electric lamp, bracket and window.
• Power consumption : 15W at 120V
• Type name : TGE-12015L
3. Checking method of malfunction
• The lamp is turned on when the door is opened.
• Selecting a program and press the start button.
• As the drum begins rotating, check if the lamp is turned on after opening the door.
If the drum does not rotate, check the door switch, belt switch, and thermostat fan.
• If the lamp is still off, remove the front panel assembly and check if 120v voltage is applied to the lamp.
• If the lamp is off even though the 120v voltage is being applied, replace the lamp.
If 120v voltage is not applied to the lamp, replace the door switch.
4. Procedure of replacement
1Remove top plate
2Remove front panel assembly
3Remove the cabinet front assembly
4 Remove the wires and screws to disassemble the part.
5 Assemble the parts in reverse order.
Lamp Ass'y
7 Remove the wires and screws to disassemble the part.
8 Assemble the parts in reverse order.

Lamp Assembly

38
Part Code : 3612625300
Lamp Braket
Loosen the screws from
the inside of the drum.
Window