Assembly Area - Asko DC7573 Operating Instructions Manual

Assembly area

• If the dryer cabinet is to be connected to the
exhaust air ventilation this must be available
in the premises.
• An earthed power outlet must be available
within 2 m of the top section of the dryer
cabinet. The dryer cabinet has a 2 m long
earthed cable with plug connected at the top.
The power outlet must be positioned so that
an extension cord is not necessary.
• The power socket should be simple to reach
once the dryer cabinet has been installed.
Observe this even when the dryer cabinet is
installed in an in-built cabinet or the like. See
the section 'Electrical installation'.
• The floor where the cabinet is to be positioned
must support a weight of about 60 kg.
• The floor must be flat with a drop of max 2,5
cm below the cabinet.
• The dryer cabinet is only intended for
placement indoors with a temperature over 0
°C.
• The dryer cabinet must not be placed in
environments where high-pressure washers
are used for cleaning.
595
127
O102
DC7573
1695-1720
DC7583
1835-1860
600
615
295
7