Special Safety Rules - Ryobi RAP200 User Manual

GB
FR DE ES

SPECIAL SAFETY RULES

„ Keep guards in place and in working order. Never
operate the tool with any guard or cover removed.
Make sure all guards are operating properly before
each use.
„ Use right tool. Don't force tool or attachment to do a
job it was not designed for. Don't use it for a purpose
not intended.
„ Do not operate the equipment while barefoot
or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect
your feet and improve your footing on slippery
surfaces.
„ Exercise caution to avoid slipping or falling.
„ Always wear safety glasses with side shields.
Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
„ Use only recommended accessories. The use of
improper accessories may cause risk of injury.
„ Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check
for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or
other part that is damaged must be properly repaired
or replaced by an authorized service center to avoid
risk of personal injury.
SPECIAL SAFETY RULES
„ Follow manufacturer's recommendations for safe
loading, unloading, transport, and storage of
machine.
„ Be thoroughly familiar with controls. Know how to
stop the product and bleed pressure quickly.
„ Keep tool dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
„ Do not use tool if switch does not turn it off. Have
defective switches replaced by an authorized service
center.
„ Avoid dangerous environment. Don't use in damp
or wet locations or expose to rain. Keep work area
well lit.
„ Never direct a paint stream toward people or pets,
or any electrical device.
IT NL PT DK SE FI NO RU PL CZ
English
„ Never start the machine if ice has formed in any
part of the equipment.
„ Keep away from hot parts.
„ Check bolts and nuts for looseness before each
use. A loose bolt or nut may cause serious motor
problems.
„ Before storing, allow the product to cool.
„ Store in a cool, well-ventilated area, safely away
from spark and/or flame-producing equipment.
„ Never use the sprayer without a spray tip
installed.
„ An injection injury can lead to possible
amputation. See a physician immediately.
„ Never put your hand in front of the spray tip when
in use. Gloves will not always provide protection
against an injection injury.
„ Wear protective clothing to keep paint off skin
and hair, along with a mask or respirator during
use. Paints, solvents, and other materials can be
harmful if inhaled or if they come into contact with the
body.
„ Always unplug the paint station, shut the unit off
and release pressure before servicing, cleaning
the tip or guard, changing the tip, or leaving
unattended.
„ Plastic can cause sparks. Never hang plastic to
enclose a spray area. Do not use plastic drop cloths
when spraying flammable materials.
„ Do not spray outdoors on windy days.
„ Do not attempt to clean or unclog the spray tip
with your finger.
„ Make sure your extension cord is in good
condition. When using an extension cord, be sure
to use one heavy enough to carry the current your
product will draw.
SERVICE
„ Have your paint tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
DESCRIPTION
1. Pump
2. Prime/spray lever
3. Roller hook
4. Pistol-grip sprayer hook
5 . 13.25 liter paint container
6. 7.62 m grounded high pressure hose
7. ON/OFF switch
2
HU RO LV LT EE HR SI SK GR TR