National Instruments Data Acquisition Device E Series User Manual page 234

PCI-MIO-16E-1
© National Instruments Corporation
For a detailed description of each signal, refer to the
Descriptions section of Chapter 1,
The PCI-MIO-16E-1 is a Plug-and-Play, multifunction AI, AO, DIO, and
TIO device for PCI bus computers.
The PCI-MIO-16E-1 features the following:
• 16 AI channels (eight differential) with 12-bit resolution
• Two AO channels with 12-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector
Because the PCI-MIO-16E-1 has no DIP switches, jumpers, or
potentiometers, you can easily configure and calibrate it through software.
Appendix A
DAQ System
A-99
Device-Specific Information
I/O Connector Signal
Overview.
E Series User Manual