Table of Contents
Advertisement
LED
On
Dim
Off
1 blink
2 blinks
4 blinks
Note
Some hardware accessories may not yet reflect the NI-DAQmx terminal names. If
you are using an E Series device in Traditional NI-DAQ (Legacy), refer to Table 1-5 in
Chapter 1 for the Traditional NI-DAQ (Legacy) signal names.
© National Instruments Corporation
DAQPad-6052E LED Patterns
The DAQPad-6052E has an LED on its front panel. Refer to Table A-6 for
descriptions of each LED state.
Table A-6. DAQPad-6052E LEDs
The device is receiving power and is connected to an active 1394 port.
The device is receiving power but is not connected to an active 1394
port.
No power is being provided to the device.
NI DAQPad-6052E Pinout
Figure A-70 shows the NI DAQPad-6052E device pinout.
Appendix A
DAQPad-6052E State
—
A-77
Device-Specific Information
E Series User Manual
Advertisement
Table of Contents
