Table of Contents
Advertisement
LED
On
Dim
Off
1 blink
2 blinks
4 blinks
Note
Some hardware accessories may not yet reflect the NI-DAQmx terminal names. If
you are using an E Series device in Traditional NI-DAQ (Legacy), refer to Table 1-5,
Terminal Name
© National Instruments Corporation
DAQPad-6070E LED Patterns
The DAQPad-6070E has an LED on its front panel. Refer to Table A-8 for
descriptions of each LED state.
Table A-8. DAQPad-6070E LEDs
The device is receiving power and is connected to an active 1394 port.
The device is receiving power but is not connected to an active 1394 port.
No power is being provided to the device.
NI DAQPad-6070E BNC Pinout
Figure A-84 shows the NI DAQPad-6070E BNC device pinout.
Equivalents, for the Traditional NI-DAQ (Legacy) signal names.
Appendix A
DAQPad-6070E State
—
A-93
Device-Specific Information
E Series User Manual
Advertisement
Table of Contents
