Programmed Playback - Teac CR-H226 Owner's Manual

Up to 32 tracks can be programmed in the desired
order.
1 Press the PROGRAM button in the stop mode.
2
Select a track using the numeric buttons.
When you use the numeric buttons, press the
input selector button of the remote control
first.
< You can also use the skip button and the
PROGRAM button to program tracks. Select a track
using the skip button (. or /), and within 5
seconds press the PROGRAM button.
Repeat this step to program more tracks.
< If you made a mistake, press the CLEAR button.
The last programmed number will be deleted.
< Up to 32 tracks can be programmed. If you attempt
to program more than 32 tracks, "P-FULL (Program
is full)" is displayed and no more can be
programmed.
24

Programmed Playback

3 When programming has been finished, press
the PLAY button (y) to start programmed
playback.
When the playback of all the programmed tracks
has finished, or if the STOP button (H) or the
STANDBY/ON button is pressed, the program mode
will be cancelled.
But the programmed contents aren't lost. You can
return to the programmed playback by pressing the
PROGRAM button and the PLAY button (y).
< If the disc tray is opened or the power cord is
unplugged, the programmed contents will be
erased.