Repeat Playback - Teac CR-H226 Owner's Manual

Repeat Playback

Each time the REPEAT 1/ALL button is pressed, the
mode is changed as follows:
When a CD is loaded:
Repeat 1
Play (off)
When an MP3/WMA disc is loaded.
Repeat 1 RPT Folder
Play (off)
< If one of the following buttons is pressed, repeat
mode will be canceled:
STOP, SOURCE (AUX, PHONO, USB, TAPE,
TUNER), BAND, open/close (L),
STANDBY/ON
Repeat one track (Repeat 1)
The track being played will be played repeatedly. If
you press the skip button (.or/) and select
another track, the track you selected will be played
repeatedly.
It is also possible to select a track to be repeated in
the stop mode. Press the REPEAT 1/ALL button and
select a track using the numeric buttons.
Repeat all the tracks in the folder (RPT Folder)
(MP3/WMA only)
All the tracks in the folder will be played
repeatedly.
< This mode is not available in the stop mode.
< When the disc has no folder, this mode will be
skipped.
Repeat Playback
Repeat All
Repeat All
Repeat all the tracks (Repeat All)
All the tracks will be played repeatedly.
During programmed playback, programmed tracks
will be played repeatedly.
A-B Repeat Playback
This function allows repeat playback of any desired
portion of the disc.
1. Designate the point at which repeat playback
should start by pressing the A-B button.
"Repeat A-" lights up and "B" blinks.
2. When the point at which repeat playback
should end is reached, press the A-B button
again.
"Repeat A-B" lights up.
The designated point with A-B button will be
played back repeatedly.
< To return to normal play, press A-B button until
"Repeat A-B" disappears from the display.
< There must be more than 3 seconds between A
and B.
23