Programmed Playback - Teac Reference DR-H300 Owner's Manual

DVD VCD CD
Up to 20 chapters/tracks can be programmed in the desired
order.
1
If another source is selected, press the DISC button or
the FUNCTION button to select "DISC".
2
Press the PROGRAM button.
The program list appears on the screen.
< To cancel the program mode, press the PROGRAM button
again, or select "EXIT" using the cursor buttons and press the
ENTER button.
3
Enter your desired "title and chapter number" or "track
number" using the numeric buttons.
Example:
To enter number 5, press "0" and "5".
Repeat this step to program more chapters/tracks.
< If you made a mistake, move the cursor on the track number
and overwrite it using the numeric buttons.
< To program more than 11 chapters/tracks, press the /
button to advance to the next program page (or select "tl"
using the cursor buttons and press the ENTER button). Press
the . button to return to the previous page.
30

Programmed playback

4
When the selection of chapter/track numbers is
completed, select "START" using the cursor buttons and
press the ENTER button to start programmed playback.
< During programmed playback, the numeric buttons don't
work.
< When playback ends, the program is cleared.
< If you press one of the following buttons, the programmed
contents will also be cleared.
OPEN/CLOSE, STANDBY/ON, STOP
FUNCTION (AUX, USB, TUNER)