Listening To Fm/Am - Teac CR-H226 Owner's Manual

1
1
Press the SOURCE button repeatedly to select
TUNER mode.
2 Press the BAND button to select FM or AM.
3 Press the TUNING MODE button to select
"Auto tune" mode.
Each time the TUNING MODE button is pressed, the
mode is changed as follows.
Manual tune
Auto tune
Preset tune
4 Select the station you want to listen to (auto
selection).
When a station is tuned in, the tuning process will
stop automatically.
If you want to stop the tuning process, press the
TUNING/PRESET/TIME button.

Listening to FM/AM

Selecting stations which cannot be tuned
3 4
automatically (Manual tune)
2
< "STEREO" is displayed when a stereo broadcast is
< "TUNED" is displayed when a broadcast is correctly
FM MODE Button
Stereo
Mono
Select "Manual tune" in step
Repeatedly press the TUNING/PRESET/TIME button
until the station you want to listen to is found. Or
hold down the TUNING/PRESET/TIME button until
the station you want to listen to is found and
release the button.
FM: 50 kHz steps, AM: 9 kHz steps
tuned in.
tuned in.
Pressing this button alternates between Stereo
mode and Mono mode.
FM stereo broadcasts are received in stereo and the
STEREO indicator lights in the display.
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.
3
.
29