Before Recording; Setting The Record Mode - Teac CR-H226 Owner's Manual

Before Recording

This unit can record musics from CDs, records, cassette
tapes and radio, on USB memory devices, as MP3 or
WMA files.
CAUTION
< Do not disconnect the USB storage device during
recording.
Do not disconnect the power cord during recording.
It may cause damage to the products.
< Adjust the volume of the external audio source to
suitable level before recording. If not, the recording
quality becomes poor.
Note
< The recorded files are saved in the AUDIO folder.
< The FILE NAME is fixed up automatically in regular
sequence like
"AUDIO002.MP3", .......
For Example:
If there are
"AUDIO009.MP3" files in the AUDIO folder, and
you make a recording, a new file will be
"AUDIO010.MP3".
< Before recording check the remaining capacity of
the USB strage device using your PC.
You can't check the remaining memory capacity
with this unit.
"AUDIO001.MP3",
"AUDIO004.MP3" and

Setting the Record Mode

2
You can select the desired record mode.
1 In USB mode, press the REC MODE button.
2
Press the FOLDER buttons (b/5) to select a
desired recording mode.
Each time you press the FOLDER button (b/5), the
recording mode changes as follows:
MP3 64K MP3 96K
WMA 128K WMA 96K
3
Within 3 seconds, press the ENTER button.
Bitrate
Value indicating the amount of data compression
progress in a per second.
The higher bitrate is the larger the amount of data.
This does mean that the sound is high quality.
128Kbps/s is recommended for listening enjoyment.
3
1
MP3 128K MP3 192K
(Default)
WMA 64K
27