Basic Operation - Teac CR-H226 Owner's Manual

A How to select SOURCE
Every time the SOURCE button is pressed, the
mode is changed as follows:
CD USB TAPE
TUNER
Or press the CD, USB, TAPE, AUX 1/2, PHONO or
TUNER button on the remote control to select the
source directly.
B Adjust the volume
To protect speakers from a sudden high-level
signal, gradually turn up the volume to the required
level with the VOLUME/SELECT knob.
C Muting
To cut the sound temporarily, press the MUTING
button. To cancel muting, press the MUTING
button again or change the volume setting.
18

Basic Operation

AUX 1 AUX 2
PHONO
B
A
D Dimmer
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer
function.
< This function will be cancelled when the unit is
turned off.
< You can also adjust the dimmer on the front panel
control (see next page).
E
Listening through headphones
Insert the headphone plug into the PHONES jack,
and adjust the volume. The sound from speakers
will be cut off.
< Subwoofer output will be cut off, when the
headphone jack is inserted.