Basic Playback - Teac CR-H226 Owner's Manual

A To stop playback
Press the stop button (H) to stop playback.
B
To suspend playback temporarily (pause
mode)
Press the pause button (J). Playback stops at the
current position.
To resume playback, press the play button (G) or
pause button (J).
C To skip to the next or a previous track/file
Press the . m or , / button several
times until the desired track/file is found. The
selected track/file will be played from the
beginning.
On the remote control press the . or /
button.
< When the .m button is pressed once during
playback, the track/file being played will be played
from the beginning.
To return to the beginning of the previous
track/file, press the .m button twice.
22

Basic Playback

C
D
B
D Search for a part of a track/file
During playback, hold down the . m or
,/ button and release it when the part you
want to listen to is found.
On the remote control use them or , button.
E
Direct Playback
While in stop or playback mode, you can use the
numeric buttons of the remote control to select a
track/file.
When you use the numeric buttons, press the
input selector button of the remote control
first.
Press the numeric buttons to select a track/file.
Playback starts from the selected track/file.
For instance, to select track/file number 35, press
"3", "5".
To select numbers less than 10, press the number
and then the ENTER button. As an example, to
select number 5, press "5" and the ENTER button.
(Optionally, you may press just the number "5" and
then wait a few seconds.)
A