Basic Operations; Switching On And Off; Changing Channels; Volume - Teac HDB843 User Manual

Basic Operations

Once channel search is completed, you can start to watch digital terrestrial TV channels
and radio broadcasts. Some typical operations are given in this chapter.

Switching On and Off

Whenever you are not using the receiver, press the
it into standby mote, you also can press it to startup the receiver.

Changing Channels

You can change the current channel using one of the following methods.:
Press the P+/P- keys to go to the previous/next channel.
Enter your desired channel numeric using the
channel directly.
Note:
1.You can switch channel using Program Guide or Channel List. Please refer to related
Chapters for more information.
2.If the channel number you have entered is not a stored channel, your TV will remain
in the original channel unchanged.

Volume

Press the VOLUME+ /VOLUME-

Mute

Press the MUTE key to enable or disable the audio output.
POWER
NUMERICAL (0-9)
keys to adjust the volume.
13
key on remote control to put
keys to move to the