Glass Door Removal / Installation - Regency LRI4E Owners & Installation Manual

GLASS DOOR REMOVAL / INSTALLATION

WARNING: Do not operate the appliance
with the glass panels removed, cracked or
broken. Replacement of the glass panels
should be done by a licensed or qualified
service person.
1) Insert the door tool into the lower door latch.
Door Latch
2) Pull forward until the lower door latch is disengaged from the door frame.
3) Push downward until the Lower Door Latch is below the Door Frame.
4) Release the lower door latch until it reaches its resting point.
5) Remove the door tool and repeat steps 1-5 on the other lower door latch.
6) Pull the bottom of the door towards you until the door is angled away from
the firebox by about 30°. Lift the door up and over the upper door hooks.
7) To install the glass door - reverse steps.
Door Tool
Window Clip (x4)
Door Frame
Glass Gasket Retainer
Window Glass Gasket
Door Components
LRI4E / HRI4E Direct Vent Gas Insert
installation
|
Window Glass
Glass Door Cleaning & Removal
31
| 31