Tcp/Ip Settings]; Lpd Setting] - Konica Minolta bizhub c280 User Manual

5.1 Printing (LPR/Port9100)
5 Printing
5.1 Printing (LPR/Port9100)
Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.

[LPD Setting]

d
Reference
For details on how to install the printer driver, refer to the [User's Guide Print Operations].
5.1.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-3.
5.1.2 [LPD Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [TCP/IP Setting] ö [TCP/IP
Setting].
Item
[LPD]
bizhub C360/C280/C220
(1) LPR printing
(2) Port9100 printing
(1)
Description
Select [Enable].
[TCP/IP Settings]
Finish
5
(2)
[RAW Port Number]
Prior check
5-3