Ieee802.1X Authentication Setting] - Konica Minolta bizhub c280 User Manual

8.10 Using IEEE802.1X authentication
8.10.3

[IEEE802.1x Authentication Setting]

In the administrator mode of PageScope Web Connection, select [Network] ö [IEEE802.1x Authentication
Setting] ö [IEEE802.1x Authentication Setting].
Item
[Authentication
Status]
[IEEE802.1x Au-
thentication Set-
ting]
[Supplicant Set-
ting]
[User ID]
[Password is
changed.]
[Password]
[EAP-Type]
bizhub C360/C280/C220
Description
The authentication status is shown as follows.
• [Authenticated]: The authentication has completed.
• [Authenticating]: The authentication is in progress.
• [Unauthenticated]: Not authenticated status.
• [Authentication Failed]: The authentication has failed.
• [Failed to Retrieve Status]: No authentication status
could be obtained.
When you press [Refresh], the authentication status is up-
dated.
Select [ON].
Configure settings required in order for this machine,
which is a supplicant (authentication client), to receive au-
thentication from the authentication server.
Configure settings to fit your environment.
Enter a user ID (up to 128 characters).
This user ID is used for all EAP-Type options.
Select this check box to change the password.
Enter the password (up to 128 characters).
The password is used for all EAP-Type options other than
[EAP-TLS].
Select an EAP authentication method.
If you select [Depend on Server], the EAP-Type provided
by the authentication server will be used for authentica-
tion. Configure the supplicant settings as required for this
machine according to the EAP-Type provided by the au-
thentication server.
Do not set this item to [OFF].
8
Prior check
EAP authentication
method
8-31