Specifying The Date And Time Of This Machine - Konica Minolta bizhub c280 User Manual

10.1

Specifying the date and time of this machine

10 Managing
10.1 Specifying the date and time of this machine
Specify the date and time of the clock built into this machine.
Select one of two procedures: manually specifying the date and time and obtaining them from the NTP server
via the network.
Before using Fax in this machine, specify the date and time of this machine. When connecting this machine
to Active Directory, specify the date and time of this machine as required.
Specify the date and time of this machine when using this machine for the following purposes. For details,
refer to the relevant reference page.
- "Searching for the E-mail address in the LDAP server" (p. 10-6)
- "Restricting users of this machine (Active Directory)" (p. 7-10)
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
[Manual Setting]
bizhub C360/C280/C220
Do you use NTP?
No
Finish
10
Yes
[TCP/IP Settings]
[Time Zone]
[Time Adjustment Setting]
10-3