Status Notification Setting] - Konica Minolta bizhub c280 User Manual

10.6 Reporting the status of this machine (TRAP)
10.6.4

[Status Notification Setting]

In the administrator mode of PageScope Web Connection, select [Maintenance]ö[Status Notification Set-
ting]ö[IP Address] or [IPX Address]ö[Edit].
Item
[Destination Ad-
dress]
[Port Number]
[Node Address]
[Community Name]
[Replenish Paper
Tray]
[JAM]
[PM Call]
[Replace Staples]
[Replenish Toner]
[Finisher Tray Full]
[Service Call]
[Job Finished]
[Hole-Punch Scrap
Box Full]
[Waste Toner Box
Full]
[Drum Unit/Devel-
oping Unit Life]
[Fusing Unit Yield]
[Transfer Roller
Yield]
[Transfer Belt Unit
Yield]
[Ozone Filter Yield]
bizhub C360/C280/C220
Description
If the destination has an [IP Address], enter it. If the DNS
server has already been configured, you can enter the
host name instead. When using IPv6, you can specify the
IPv6 address.
If the destination has an [IPX Address], enter it using an 8-
digit hexadecimal value.
If the destination has an [IP Address], enter its port
number.
If the destination has an [IPX Address], enter the node ad-
dress using a 12-digit hexadecimal value.
Enter a community name (up to 15 characters).
Sends a notification when the paper tray is empty.
Sends a notification when a page has been jammed.
Sends a notification when the periodical inspection is re-
quired.
Sends a notification when there are no staples remaining.
Sends a notification when the toner is empty.
Sends a notification when the capacity of the finisher tray
has been exceeded.
Sends a notification when a service call has occurred.
Sends a notification when the job has finished.
Sends a notification when you need to empty the punch
scrap box.
Sends a notification when the waste toner box needs to be
replaced.
Sends a notification when the drum unit or developing unit
needs to be replaced.
Sends a notification when the fusing unit needs to be re-
placed.
Sends a notification when the transfer roller unit needs to
be replaced.
Sends a notification when the transfer belt needs to be re-
placed.
Sends a notification when the ozon filter needs to be re-
placed.
10
Prior check
Notification address
10-21