Konica Minolta bizhub c280 User Manual page 257

11.5 Registering Address Book
Item
[Registration of Certifi-
cation Information]
[Limiting Access to
Destinations]
[New Registration]ö[FTP]
Item
[No.]
[Name]
[Index]
[Host Address]
[File Path]
[User ID]
[Password is changed.]
[Password]
[anonymous]
[PASV Mode]
[Proxy]
[Port No.]
[Limiting Access to
Destinations]
[New Registration]ö[SMB]
Item
[No.]
[Name]
[Index]
[Host Address]
bizhub C360/C280/C220
Description
Select this check box to register certificate information.
Click [Browse] to specify the certificate to be registered. Certificate informa-
tion is supported only as a DER (Distinguished Encoding Rules) file.
To delete the registered certificate information, select [Deletion of Certification
Information].
You cannot register a certificate if the E-mail address of the destination does
not match that of the certificate. Before registering a certificate, check that
those E-mail addresses are the same.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Specify the registration number of the destination.
If you select [Direct Input], enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destina-
tion.
Enter the IP address of the destination FTP server.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name
instead.
When using IPv6, you can specify the IPv6 address.
Specify the destination directory (up to 127 bytes).
Enter the user ID to log in to the destination FTP server (up to 63 bytes).
Select this check box to change the password.
This item is displayed when editing the registered information.
Enter the password to log in to the destination FTP server (up to 63 bytes, ex-
cluding space and ").
Select whether to allow anonymous users to access the FTP server.
Select whether to communicate in PASV mode.
Select whether to use a proxy server.
Enter a port number.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Specify the registration number of the destination.
If you select [Direct Input], enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destina-
tion.
Enter the IP address of the destination computer.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name
instead.
When using IPv6, you can specify the IPv6 address.
11
11-9