Standard Specifications
The standard specifications of the CQM1-LSE01/LSE02 conform to those of SYSMAC CQM1H/CQM1-series
PCs.
Performance Specifications
Item
Input
No. of analog input points
Input range Voltage
input
Current
input
Input
Voltage
impedance
input
Current
input
Linearity
PC output code
Sampling time
Sampling period
Operation processing time
External control input
No. of occupied words
Moni-
Voltage output
tor
Output linearity
output
Output resolution
Output refresh period
Output response time
Permissible load
resistance
Insulation method
Dielectric strength
Current consumption
Dimensions
Weight
Appendix A
Specifications
CQM1-LSE01
1
1 to 5 V, –9.999 to 9.999 V, –5 to 5 V
4 to 20 mA
1 MΩ min.
10 Ω
±0.1% FS ±1 digit max. with input sampling speed set to slow
±0.5% FS ±1 digit max. with input sampling speed set to fast
Signed binary (–9999 to 9999)
0.3 ms with input sampling speed set to fast and 0.6 ms with input sampling
speed set to slow
1 ms with input sampling speed set to fast and 2 ms with input sampling speed
set to slow
5 ms
TIMING/GATE, ZERO, ZERO RESET, RESET
1 input word and 1 output word
---
---
---
---
---
---
Photocoupler insulation between input terminals and PC signals and between
input terminals and output terminals.
500 VAC for 1 minute between input terminals and output terminals
1,000 VAC for 1 minute between I/O terminals and FG
380 mA max. at 5 VDC
32 x 110 x 107 (W x H x D) mm
230 g max.
CQM1-LSE02
–9.999 V to 9.999 V
±0.1% FS
1/8192
0.5 s
0.5 s
10 kΩ min.
450 mA max. at 5 VDC
219