I Specifications - Omron CQM1H series Operation Manual

CQM1-SEN01 Sensor Unit
Item
Input points
Current consumption
Input response time
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Operating ambient humidity
Grounding
Enclosure rating
Dimension (mm)
Weight
Display
CQM1-TU001 Remote Console
Item
Cable length
Power supply voltage
Current consumption
Ambient temperature
Operating ambient humidity
Enclosure rating
Dimension (mm)
Weight
E3X-MA11 Optical Fiber Photoelectric Module
Item
Light source (wavelength)
Power supply voltage
Current consumption
Response time
Timer function
Indicators
Teaching monitor
Output mode
Dimension (mm)
Weight
Note The 10-ms OFF-delay timer function can be turned OFF.
Appendix A
Specifications
4 max.
600 mA max. at 5 VDC (supplied from Power Supply Unit).
8 ms max.
20 MΩ min. at 500 VDC between FG terminal and all signal terminals.
1,000 VAC at 50/60 Hz for 1 minute between FG terminal and all signal terminals.
1,500 V (peak to peak) with a pulse width of 100 ns to 1 µs and a 1-ns rising edge.
10 to 150 Hz, 0.15-mm double amplitude for 80 min. each in X, Y, and Z directions.
2
100 m/s three times each in X, Y, and Z directions.
Operating: 0° to 55°C
Storage: –20° to 75°C
10% to 90% with no condensation
Ground Sensor Unit at a resistance of less than 100 Ω
Enclosed mounting
32 × 110 × 120 (W × H × D)
160 g (Module excluded)
READY (green); output (orange)
3 m
5 VDC (supplied from Sensor Unit)
60 mA max.
Operating: 0° to 55°C
Storage: –20° to 75°C
10% to 90% with no condensation
Enclosed mounting
52.9 × 145 × 16.5 (W × H × D)
165 g including 3-m cable
Red LED (660 nm)
9 VDC (supplied from Sensor Unit)
50 mA max.
500 µs max.
10-ms OFF-delay timer (see note)
Operation indicator (orange) and stability operation indicator (green)
Indicators (operation indicator and stability operation indicator)
Light ON and Dark ON (selectable)
28.1 × 17.8 × 62.1 (W × H × D)
23 g
Specification
Specification
Rating
157