TrekStor i.Beat move Operating Instructions Manual page 22

7) Firmware update for the TrekStor
Firmware is the program responsible for the control of your MP3 player. A firmware update serves to
transfer firmware upgrades to your MP3 player. If you should encounter any problems with your MP3 player,
EN
please make sure that you have installed the latest firmware version.
a) Connect the i.Beat move to a USB port on your computer.
b) Back up all important data of the i.Beat move on your computer and then disconnect the MP3 player
from your computer's USB port.
c) You can update the i.Beat move with the most current firmware from the Internet. This can be found
on the TrekStor website http://www.trekstor.de for your product under "d
Please note: The update software must be installed on your computer before you can do a firmware update.
You can also find this on the TrekStor website.
d) Alternatively, insert the provided CD into your CD/DVD drive. When the startup function of your system
is activated, a menu showing all the contents of the CD will open.
Please note: If the startup function of your system is deactivated, you can access the CD/DVD drive via
"m c
y omputer
Select "f
irmWAre
e) Download the firmware including the update program (file extension *.zip file) and unzip it to a folder of
your choice.
f ) Start the "
English). Follow the installation instructions.
g) Select "s
tArt
window opens.
h) Open the firmware (file extension *.rfw) via "o
selected folder.
i) Turn on the i.Beat move. On the i.Beat move under "s
j) Now connect the i.Beat move to a USB port on your computer.
Please note: If a Windows® security prompt appears, select "c
k) Start updating the firmware via "u
Please note: To prevent damage to your MP3 player, always follow the update procedures exactly and please
be patient.
l) Close the update program via "e
m) Disconnect your i.Beat move from the USB port on your computer.
n) Your i.Beat move is now ready for normal use again.
"/"c " and start the program "
omputer
" and follow the instructions. Your internet browser opens and the TrekStor website is loaded.
. " file to install the software for the firmware update on your computer (available only in
setup exe
" + "p " + "t s
rogrAms rek
xit
i.Beat move
. " in the main directory of the CD/DVD.
menu exe
.b " to run the "f
tor i eAt move
"; you have previously unzipped this file in your
pen
ystem
ontinue inStAllAtion
". Please wait until the update procedure is completely finished.
pdAte
".
– 22 –
".
oWnloAds
u ". The update program
irmWAre pdAte
", select the option "u
pdAte
".
". Confirm with "y ".
es