Product Registration - Wahl Z100 Instructions Manual

MAINS CLIPPER
The wires in the mains lead are coloured in accordance to the
following code:
Blue Neutral (N)
This lead is fitted with a 3 pin plug which has a 3 amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes
damaged, it should be cut off and disposed of, and a suitable plug
fitted as detailed below.
The wire which is coloured BLUE must be connected to the terminal
in the plug which is marked with the letter 'N' or coloured BLACK or
BLUE.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter 'L' or coloured
RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is
marked with the letter 'E' or has the Earth symbol, or coloured
GREEN or GREEN/YELLOW.
This lead has been specifically designed for use with Wahl mains
powered clippers and should not be used with any other product.
Wahl (UK ) Ltd. accept no responsibility for any accidental injury or
damage resulting from the incorrect fitting of this product.

PRODUCT REGISTRATION

Wahl are constantly developing and launching new products in
the UK. We would like to understand your product needs and
expectations and we value any comments you may have. As part
of Wahl Customer Care, we are offering you the chance to be kept
up to date with the latest product launches, innovations and special
offers.
Please take a minute to register your product online at www.wahl.co.uk.
18
Brown live (L)