Wahl Z100 Instructions Manual page 12

MAINS CLIPPER
f Remove the attachment comb (Fig. 5b) after every use. Remove the
hair clippings from the blade set with the cleaning brush.
f If a thorough cleaning is required, the blade set can be
removed. See chapter Changing the blade set.
f After cleaning the blade set, we recommend using hygienic spray. It
keeps all blade sets hygienically clean and is effective against bacteria
and viruses.
f Oil the blade set with the blade set oil (Fig. 6).
f We recommend that you clean and care for your blade set during and
after clipping. Oiling and cleaning of the blade set protects against
corrosion.
f Switch the appliance on briefly (approx. 10 seconds) to ensure the oil
film is evenly distributed.
f For a good and long-lasting cutting performance, it is important
to oil the blade set frequently
f If the cutting performance deteriorates after long use despite
regular cleaning and oiling, the blade set should be replaced.
f Only wipe the appliance with a soft, slightly damp cloth.
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Cause: Blade set is dirty.
f Clean and oil the blade set (Fig. 6).
Cause: Blade set is worn out.
f Replace the blade set (Fig. 7/8/9).
Skin injury
Cause: Too much pressure on the skin.
f Less pressure on the skin.
Cause: Cutting angle is too high.
12