Wahl Z100 Instructions Manual page 15

MAINS CLIPPER
SHORT TAPERED STYLES
If a short tapered cut on the sides and back is desired, please follow
the following diagram:
Starting with the desired attachment comb, cut from the back of the
neck to the crown. Hold the attachment comb flat against the head
and slowly move the clipper through the hair as shown.
Use the same procedure from the lower side to the upper side of
the head, as shown. Then cut the hair against the direction in which
it grows from the front to the crown and even up the cut with the
sides.
To give a 'flat top' look, the hair on top of the head must be cut over
the top of a flat top comb rather than using the attachment comb.
Use closer cutting attachment combs to "taper" the hair down to the
neckline as desired. Comb hair and check for uneven spots and
outline sideburns and neckline as previously described.
The four basic areas illustrated on the following diagram are your
"road map" to easy do-it-yourself hair cutting.
15