Breville BES840XL Instruction Booklet page 8

Hide thumbs Also See for BES840XL:
Table of Contents

Advertisement

Available languages

Available languages

PAGE hEAdER.....
oPERAtInG
notE
The amount of espresso extracted
in the cup will vary depending on
your grind size and dose amount.
Preset Shot volume - 2 CUP button
Press the 2 CUP button once to extract
a double shot of espresso at the preset
volume (approx. 2oz / 60ml). The
extraction will start using the low
pressure pre-infusion (see page 14).
The machine will stop after the preset
volume has
been extracted.
notE
Pressing the 1 CUP or 2 CUP button
during a preset shot volume will
immediately stop the extraction.
Re-Programming
Shot volume - 1 CUP Button
To begin programming, press
1.
the PROGRAM button once. The
machine will beep once and the
PROGRAM button will begin to
flash. This indicates the machine is in
programming mode.
Press 1 CUP button to start
2.
espresso extraction. Press 1 CUP
button again once desired volume
of espresso has been extracted.
The machine will beep twice to
indicate the new 1 CUP volume
has been set.
14
Re-Programming
Shot volume - 2 CUP Button
To begin programming, press
1.
the PROGRAM button once. The
machine will beep once and the
PROGRAM button will begin to
flash. This indicates the machine is in
programming mode.
Press 2 CUP button to start
2.
espresso extraction. Press 2 CUP
button again once desired volume
of espresso has been extracted.
The machine will beep twice to
indicate the new
2 CUP volume has been set.
Resetting default volumes
To reset the machine to the default 1
CUP and 2 CUP shot volumes, press and
hold the PROGRAM button until the
machine beeps three times. Release the
PROGRAM button. The machine will
return to its original default settings.
notE
Default settings: 1 CUP shot
volume is approx. 1oz / 30ml. 2
CUP shot volume is approx. 2oz /
60ml.
PAGE hEAdER.....
oPERAtInG
Manual Shot volume
Manually control low pressure
pre-infusion time and shot volume
without re-programming the preset shot
volume.
Press and hold the 1 CUP or 2 CUP
button. The extraction will enter low
pressure
pre-infusion until the button is released.
When the 1 CUP or 2 CUP button is
released, extraction will continue at
full pressure. Press the 1 CUP or 2 CUP
button again once the desired volume of
espresso has been extracted.
OR
notE
For optimal flavor when using a 1
cup filter basket, you should extract
approx. 1oz / 30ml. When using a 2
cup filter basket, you should extract
approx. 2oz / 60ml.
WARNING
The metal parts of the portafilter
will be very hot.
ESPRESSo PRESSURE GAUGE
Low Pressure Pre-Infusion
The gauge needle will be positioned in
the pre-infusion zone at the start of the
extraction indicating the machine is in
low pressure pre-infusion mode.
The low pressure pre-infusion gradually
increases water pressure to gently
expand grinds for an even extraction
before increasing to full pressure.
Ideal Espresso Zone
The gauge needle, when positioned
anywhere within the solid grey zone
during extraction, indicates the espresso
has been extracted at the ideal pressure.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents