Breville BES840XL Instruction Booklet page 13

CARE & CLEAnInG PAGE hEAdER.....
REPLACInG thE WAtER fILtER
1 2 3
Soak water filter for 5 mins Rinse water filter & mesh Place filter into filter holder
The provided water filter helps prevent
scale build-up in and on many of the
inner functioning components. Replacing
the water filter every two months will
reduce
the need to decalcify the machine.
If you live in a hard water area, we
recommend you change the water filter
more frequently.
• Remove the new water filter from the
plastic bag.
• Soak the new water filter in a cup of
water for 5 minutes, then rinse under
cold running water.
• Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
• Insert the new water filter into the
two parts of the water filter holder.
• Set Date Dial 2 months ahead.
• To install the assembled water filter
holder into the water tank, align the
base of the water filter holder with the
adapter inside the water tank. Push
down to lock into place.
• Slide the water tank back into
position at the back of the machine,
ensuring to push down completely to
lock into place.
The water filter should be removed if
using filtered or bottled water.
24
4 5 6
REPLACEMENT DUE
Set date 2 months ahead Install filter in water tank Insert & lock water tank
notE
To purchase water filters contact
Breville Consumer Service on
1-866-273-8455 (USA) or
1-855-683-3535 (Canada).
CLEAnInG CyCLE
The CLEAN ME light will illuminate
when a cleaning cycle is required. This
is a back-flushing cycle and is separate
from decalcifying.
Insert the 1 CUP filter basket into the
1.
portafilter, followed by the supplied
cleaning disc, followed by 1 cleaning
tablet.
Lock the portafilter into the group
2.
head.
Place a large container beneath
3.
the group head.
Ensure the water tank is filled
4.
with cold water and the drip tray
is empty.
Press the POWER button to turn
5.
the machine Off.
While pressing the 1 CUP and
6.
2 CUP buttons, simultaneously
press the POWER button. Hold
all
3 buttons together for 10 seconds.
PAGE hEAdER.....
CARE & CLEAnInG
The cleaning cycle will
7.
commence and last for
approximately
5 minutes. During this time, water
will intermittently pour from the
group head. Once complete, 3
beeps will sound.
Remove the portafilter and
8.
ensure the tablet has completely
dissolved. If the tablet has not
dissolved, repeat until the tablet
has dissolved.
dECALCIfyInG
After regular use, hard water can cause
mineral build up in and on many of the
inner functioning components, reducing
the brewing flow, brewing temperature,
power of the machine, and taste of the
espresso. We advise decalcifying the
machine every month and especially if
not using the machine for an extended
period eg. before going on vacation.
Remove the portafilter.
1.
Pour a 50/50 mixture of white
2.
vinegar and cold tap water into
the water tank.
Place a large container beneath
3.
the group head and steam wand.
When the brewing temperature
4.
has been reached and all the
button surrounds on the control
panel
have illuminated, press and hold
the 1 CUP button to commence
a manual pour. Release the
button once half the mixture of
white vinegar and water has run
through the group head.
Set the STEAM/HOT WATER
5.
dial
to the hot water position and
allow hot water to run through the
hot water outlet for approximately
30 seconds. Return the dial back
to the STANDBY position.
Set the STEAM/HOT WATER
6.
dial to the steam position and
allow steam to run through the
steam wand for approximately 2
minutes. Return the dial back to
the STANDBY position.
If any of the mixture remains in
7.
the water tank, press and hold
the 1 CUP button to commence a
manual pour. Release the button
once the tank is empty and
nothing runs through the group
head.
In harder water environments, we
8.
recommend repeating this cycle.
After decalcifying, remove the
9.
water tank and rinse thoroughly
then refill with fresh cold water
only. To rinse the machine, repeat
the steps above.
WARNING
Do not immerse power cord, power
plug or appliance in water or any
other liquid. The water tank should
never be removed or completely
emptied during decalcifying.
CLEAnInG thE StEAM WAnd
• Immediately after texturing milk,
turn steam on to purge out any
residual milk from the steam wand
then wipe the wand with a damp
cloth.
• If any of the holes in the tip of the
steam wand become blocked, ensure
the STEAM/HOT WATER dial is in
the STANDBY position. Press the
POWER button to turn the machine
Off and allow to cool. Use the pin on
the end of the provided cleaning tool
to unblock the hole(s).
25