For U.k. And Ireland Only - FoodSaver V3840 Reference Manual

For U.K. and Ireland Only

If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of
the correct type. Please refer to "Installation of a plug" below.
Installation of a plug applicable to U.K. and Ireland.
NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of
the plug, please contact a qualified electrician. If a 3A 3-pin plug is fitted, it must be an ASTA approved
plug, conforming to BS1363 standard.
Replacement 3A fuses must be BSI or ASTA BS1362 approved.
The wires in the mains lead are coloured as such:
BROWN - LIVE
BLUE - NEUTRAL
Please note that the colour of these mains wires may not correspond with the colour markings that identify
the terminals in your plug.
Please proceed as follows:
The BROWN coloured wire must be connected to the terminal, which is marked with the letter "L" or is
coloured RED.
The BLUE coloured wire must be connected to the terminal, which is marked with the letter "N" or is
coloured BLACK.
www.foodsavereurope.com
2