Regular Faceplate Installation - Regency L390E-NG1 Owners & Installation Manual

Note: A mantel defl ector may be installed to reduce the minimum mantel height.
Refer to minimum clearances in the installation manual.
If not installing the mantel defl ector - proceed to step 3.
1. Line up the mantel defl ector (tabs to the back) with the full screen frame
as shown below.
2. Bend all 3 tabs 90º to secure the defl ector to the top of the frame
. The tabs should be fl ush with the underside of the top lip of the back plate.
Top of backing
plate
3. Secure the regular faceplate to the unit by securing with 4 screws in
locations shown below.
L390E-1 / HZI390E-1 Direct Vent Gas Insert

REGULAR FACEPLATE INSTALLATION

Back of
Faceplate
4. Install lower trim piece oriented as shown below.
Trim
Final Install
INSTALLATION
41