This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/thermostat will
continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
(Do not cut the ground terminal off under any circumstances.)
PROFLAME REMOTE SYSTEM GTM (L390E / HZI390E)
GTM REMOTE SYSTEM - IMPORTANT: The AA batteries in the receiver operate the unit. If the batteries become weak, they will need
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
22
WIRING DIAGRAM
Profl ame System
Proflame System
Confi guration
Configuration
885 ON/OFF
886 GTMF
Wire Diagram
Illustrated wire diagram
SureFire™ Switch
0.584.907
Thermostat
(Optional)
to be replaced with quality AA alkaline batteries. The unit will not operate without AA batteries.