Fcc Regulations For Telephone Line Interconnection - Multitech MT56DSU-S User Manual

Multi-tech systems syncronous 56k bps data service unit user guide mt56dsu-s
Table of Contents

Advertisement

Appendix C - Regulatory Information

FCC Regulations for Telephone Line Interconnection

1.
This equipment complies with Part 68 of the FCC rules. On the outside surface of this equipment is a
label that contains, among other information, the FCC registration number and ringer equivalence
number (REN). If requested, this information must be provided to the telephone company.
2.
As indicated below, the suitable jack (USOC) connecting arrangement for this equipment is shown in
Appendix B. If applicable, the facility interface codes (FIC) and service order codes (SOC) are also
indicated.
3.
The ringer equivalence number (REN) is used to determine the quantity of devices which may be
connected to the telephone line. Excessive REN's on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not all areas, the sum of the REN's should not
exceed five (5.0). To be certain of the number of devices that may be connected to the line, as
determined by the total REN's, contact the telephone company to determine the maximum REN for the
calling area.
4.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance. But if advance notice isn't practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
5.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make necessary modifications in order to maintain uninterrupted service.
6.
If trouble is experienced with this equipment (the model of which is indicated below) please contact
Multi-Tech Systems, Inc. at the address shown below for details of how to have repairs made. If the
trouble is causing harm to the telephone network, the telephone company may request you remove the
equipment from the network until the problem is resolved.
7.
No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees.
Unauthorized repairs void registration and warranty.
8.
This equipment cannot be connected to public coin service provided by the telephone company.
(Contact the state public utility commission, public service commission or corporation commission for
information.)
Manufacturer:
Model Number:
FCC Pt 68 Registration #:
Ringer Equivalence:
SOC Codes:
Modular jack (USOC):
Service Center in U.S.A.:
Multi-Tech Systems, Inc.
MT56DSU-S
AU7USA-24704-XD-N
N/A
6.0N
RJ-48S
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112 USA
(763) 785-3500 or (800) 328-9717
U.S. Fax (763) 785-9874
Appendix
36

Advertisement

Table of Contents
loading

Table of Contents