Multitech ISI5634UPCI/4 Command Reference Manual
Multi-tech multimodem isi isi5634upci/4 modem card: reference guide
Hide thumbs
Also See for ISI5634UPCI/4:
- Quick start manual (18 pages) ,
- User manual (71 pages) ,
- Reference manual (2 pages)
Table of Contents
Advertisement
Quick Links
MultiModem®
External Modems
MultiModem® ZBA (MT5634ZBA Global and Non-Global Series)
MultiModem® ZBA USB (MT5634ZBA-USB)
MultiModem® IND (MT5634IND)
MultiModem® DID (MT5634ZBA-DID)
Internal Modems
MultiModem® ZPX (MT5634ZPX-PCI Series)
MultiModem® ZPX (MT5634ZPX-ISA)
Server Cards
MultiModem® ISI (ISI5634UPCI Series)
AT Commands
Reference Guide
Advertisement
Table of Contents
Related Manuals for Multitech ISI5634UPCI/4
Summary of Contents for Multitech ISI5634UPCI/4
- Page 1 MultiModem® External Modems MultiModem® ZBA (MT5634ZBA Global and Non-Global Series) MultiModem® ZBA USB (MT5634ZBA-USB) MultiModem® IND (MT5634IND) MultiModem® DID (MT5634ZBA-DID) Internal Modems MultiModem® ZPX (MT5634ZPX-PCI Series) MultiModem® ZPX (MT5634ZPX-ISA) Server Cards MultiModem® ISI (ISI5634UPCI Series) AT Commands Reference Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revisions...
-
Page 3: Table Of Contents
Chapter 3 - Result Codes ...29 Chapter 4 – Setting Your Country or Regional Code...30 Global Modem Configuration ...30 Windows® Users...30 Non-Windows® Users...30 MultiModem® Configuration ...30 Index ...31 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Contents Contents... -
Page 4: Chapter 1 - At Commands
The most familiar command string is the initialization string, which is used to configure the modem when it is turned on or reset, or when your communications software calls another modem. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... -
Page 5: List Of General Commands
Fallback and Fall Forward Control Direct Connect Enable Cisco Configuration Response Speed DTR Dialing Asynchronous Word Length Long Break Response Priority Serial Port Baud Rate Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... -
Page 6: List Of V.92 Commands
Store Callback Password #CBP Callback Parity #CBR Callback Security Reset #CBS Callback Enable/Disable Set 11-bit Parity Enter Setup Password #S=x Store Setup Password Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... -
Page 7: List Of Escape Commands
Wait for Digit Time-Out Time Busy Out After Call Completion Number of DID Digits Busy Out After Call Completion Number of DID Digits Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Description Chapter 1 – AT Commands... -
Page 8: At Commands Detail
Detect AT&T call card “bong” tone. The character should follow the phone number and precede the user’s call card number: ATDT1028806127853500$123456789 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands NTER... - Page 9 Speaker always off. Speaker on until carrier signal detected. Speaker always on when modem is off-hook. Speaker on until carrier is detected, except while dialing. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 10 W1 CONNECT result code reports serial port speed, enables protocol result codes. W2 CONNECT result code reports line speed, enables protocol result codes. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 11 Sets guard tone to 550 Hz. &G2 Sets guard tone to 1800 Hz. Note: The &G command is not used in North America. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 12 &W1 Clears user default settings from nonvolatile memory and causes the factory defaults to be loaded at power-on or following the ATZ command. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 13 V.42 reliable mode.If the modem cannot make a V.42 connection, it disconnects. V.42, MNP, or non-error correction (same as \N3). V.42, MNP, or non-error correction (same as \N3). Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 14 Disables adaptive answer result codes. Enables adaptive answer result codes. Note: For descriptions of the +FAA= and other fax commands, see the Multi-Tech Fax Class 2.1 Developer’s Guide. Command: View Numbers in Blacklist...
- Page 15 Default: 30 (300 ms break) Description: Sets the length of a long break transmitted by the modem if set up by the modem. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
- Page 16 $SB300 $SB1200 $SB2400 $SB4800 $SB9600 $SB19200 $SB38400 $SB57600 $SB115200 $SB230400 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) V.23 300 bps 1200 bps 2400 bps 4800 bps 9600 bps 14400 bps 19200 bps 28800 bps 33600 bps Set serial port to 300 bps.
-
Page 17: V.92 Commands
+PMHR=12 +PMHR=13 +PMHR=? +PMHR? Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Deny MOH request Grant MOH request with 10 second timeout Grant MOH request with 20 second timeout Grant MOH request with 30 second timeout... - Page 18 Displays the current value. +DR: NONE +DR: V42B +DR: V44 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Deny MOH request Grant MOH request with 10 second timeout Grant MOH request with 20 second timeout Grant MOH request with 30 second timeout...
- Page 19 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Specifies the DTE direction of the data compression. 0 No compression. 3 Compression in both directions (default). Specifies the maximum number of code words to be negotiated in the transmit direction.
- Page 20 0 Maximum rate determined by the modulation selected in mod (default). 300–56000 Maximum rate value limited by the modulation selected in mod. See “Possible rates” in the mod table. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Modulation Possible rates (bps) V.92 56000, 54666, 53333, 52000, 50666, 49333, 48000, 46666, 45333, 44000, 42666, 41333.
-
Page 21: Caller Id Commands
Values: Default: Description: Displays Caller ID information of the last call received. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Disables Caller ID Enables Caller ID with formatted data Enables Caller ID with unformatted data Displays the allowed values Displays the current value Disables Distinctive Ring cadence reporting. -
Page 22: Callback Security Commands
Command: #CBRy Callback Security Reset Values: y = 0–29 Default: None Description: Clears the password and phone number in the y memory location. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... -
Page 23: Escape Sequence Commands
Remote Configuration Escape Sequence Values: Description: Initiates remote configuration mode while online with remote modem. The remote configuration escape character (%) is defined in register S9. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... -
Page 24: Did Commands
After passing the digits the modem will answer the incoming call if S0 is greater than 0. Otherwise the modem will wait for the host computer to issue an ATA command. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands... - Page 25 *DFI, the modem will output one line for every digit received. For the other formats, the modem will only output one line per call. *DF0 “DID:xxx” - Default *DF1 “DTMFx” for each digit *DF2 “RINGxxx” Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 1 – AT Commands...
-
Page 26: Chapter 2 - S-Registers
0, 1–255 decimal 0–1 decimal 0–7 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Default Description Sets the number of rings until the modem answers. ATS0=0 disables autoanswer completely. Range varies Set S0=2 for Caller ID. - Page 27 Unit Range decimal 0–19 decimal 0–23 decimal 0–1 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Default Description Sets the maximum V.34 “upstream” speed at which the modem attempts to connect. Value Speed maximum modem speed...
- Page 28 0–3, 6, 7 S109 decimal 0–2 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Default Description Enables (7) or disables (128) LAPM negotiation. The following table lists the S36 and S48 configuration settings for certain types of connections.
-
Page 29: Chapter 3 - Result Codes
V42bis – V.42 error control (LAP-M) and V.42bis data compression MNP5 – MNP 4 error control and MNP 5 data compression NoEC – No error control protocol Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Description Command executed... -
Page 30: Chapter 4 - Setting Your Country Or Regional Code
Multi-Tech Systems, Inc. Web site. Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Chapter 4 – Setting Your Country or Regional Code on the Multi-Tech Systems, Inc. Web site lists the AT... -
Page 31: Index
+PMHT= – Modem on Hold Timer...18 +PQC= – Quick Connect Control...18 +VCID= – Caller ID Selection ...21 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Index +VDR= – Distinctive Ring Report ...21 +VRID – Caller ID Query ...21 A –... - Page 32 DTR Dialing $D ...15 Echo E ...9 Echo Online Data Characters F ...9 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) Enable Dialing Message %M ...9 Enable V.34 Modulation S28...26 Enable/Disable 56K Auto Rate S42 ...27 Enter Setup Password #S ...23...
- Page 33 Speaker Mode M...9 Speed Maximum S37...27 S-Registers S0 ...26 S1 ...26 S10 ...26 S108 ...28 Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272H) S109 ...28 S11 ...26 S18 ...26 S2 ...26 S28 ...26 S3 ...26 S30 ...26 S35 ...26...