Advertisement
BASIC FEATURES
911 Dialing
At default, your Iwatsu system is programmed to
automatically contact your local Public Safety An-
swering Point (PSAP) when 911 is dialed. Enhanced
911 Service ensures that when 911 is dialed from a
system extension, information that allows the PSAP
to identify the caller's location in a building is sent to
the PSAP along with the call. Check with your sys-
tem installer or Authorized Iwatsu Distributor to make
sure your system is programmed for Enhanced 911
Service.
Half / Full-Duplex Speakerphone Toggle
To toggle the speakerphone from half to full-duplex:
• Lift the receiver.
• Press [Speaker Duplex].
or
• Press FEAT and dial
+
• Press FEAT and dial
+ +
Last Number Redial
To automatically redial the last outside (external)
number you called:
• Lift the receiver.
• Press Scroll > Speed button and dial
Making an Intercom Call
• Press the Speaker key or lift the receiver and
wait for dial tone.
• Dial an extension number.
or
If you have a [DSS] (Direct Station Selection) button
assigned for the extension you are calling:
• Press the assigned extension button.
Making an Intercom Group Call
• Dial the Intercom Group access number when
you hear the intercom dial tone.
Making an Outgoing Call
• Press the Speaker key or lift the receiver.
• Press an outside line button. You will hear a dial
tone.
• Dial telephone number.
Make a dialing mistake?
• Press the [FLASH] or outside line button to get
new dial tone.
• Dial again.
3
(full-duplex).
(half-duplex).
(12i/d).
Universal Night Answer
If you need to pick up an incoming call when the
system is in the night mode:
• Lift receiver.
• Press FEAT button and dial
or
• Press the [UNIVERSAL NIGHT ANSWER] but-
ton (if assigned).
You are connected with the incoming call.
Whisper Page
You may communicate with a busy station without
interrupting their call using the Whisper Page fea-
ture.
To communicate with a busy extension:
• After calling a busy station, press the
• You may now speak to that extension.
To Respond to Whisper Page
After receiving a whisper page while on a call:
• Press the
button to speak with the extension
that called using the whisper page feature.
• Press the
button a second time to resume
speaking with the original calling party.
Note: The original calling party cannot hear the
whisper page or your response to a whisper page.
To Respond to Whisper Page with a Text Mes-
sage:
After receiving a whisper page while on call follow
the procedures in Text Messaging feature.
20
+ .
button.
Advertisement
