Input Commands; Cal; Kps; Vks - AMX NXT-CV17 Operation/Reference Manual

Panel Runtime Operation Commands (Cont.)

@VKB

Popup the
virtual
keyboard.

WAKE

Force the panel
out of screen
saver mode.

Input Commands

These Send Commands are case insensitive.
Input Commands

^CAL

Put panel in
calibration mode.

^KPS

Set the
keyboard
passthru.

^VKS

Send one or more
virtual key strokes
to the G4
application.
CV17 17" Modero Coor Video Touch Panels
Syntax:
"'@VKB'"
Example:
SEND COMMAND Panel,"'@VKB'"
Pops-up the virtual keyboard.
Syntax:
"'WAKE'"
Example:
SEND COMMAND Panel,"'WAKE'"
Forces the panel out of the screen saver mode.
Syntax:
"'^CAL'"
Example:
SEND COMMAND Panel,"'^CAL'"
Puts the panel in calibration mode.
Syntax:
"'^KPS-<pass data>'"
Variable:
pass data:
<blank/empty> = Disables the keyboard.
0 = Pass data to G4 application (default). This can be used with VPC or text areas.
1 - 4 = Not used.
5 = Sends out data to the Master.
Example:
SEND COMMAND Panel,"'^KPS-5'"
Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the
Master via the Send Output String mechanism. This process sends a virtual keystroke
command (^VKS) to the Master.
Example 2:
SEND COMMAND Panel,"'^KPS-0'"
Disables the keyboard passthru to the Master.
The following point defines how the parameters within this command work:
• Accepts keystrokes from any of these sources: attached USB keyboard or Virtual
keyboard.
Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
SHIFT.
Refer to the Embedded Codes table on page 142 that define special characters which
can be included with the string but may not be represented by the ASCII character set.
Syntax:
"'^VKS-<string>'"
Variable:
string = Only 1 string per command/only one stroke per command.
Example:
SEND COMMAND Panel,"'^VKS-'8"
Sends out the keystroke 'backspace' to the G4 application.
Programming
141