AMX NXT-CV17 Operation/Reference Manual page 52

Installation
FIG. 42 NXD-CV17 Wall Mount panel installed into an NXA-RK17 Rack Mount Kit
7.
Secure the panel to the NXA-RK17 mount frame by first inserting and then tightening the four #4-40
screws.
8.
Insert the NXA-RK17 (with connected NXD unit) into the equipment rack, making sure to align the
screw holes along the sides of the NXA-RK17 with the holes in the equipment rack.
9.
Use a grounded Phillips-head screwdriver to secure the NXA-RK17 to the equipment rack using #10-32
screws (not included).
10.
Place the magnet faceplate back onto the main NXD unit by gripping the faceplate and placing it on the
housing with gentle force. Make sure to align the Microphone, Light, and PIR Motion sensor locations to
their respective openings on the front bezel/faceplate.
11.
Reconnect the terminal RJ-45, Ethernet, and any optional audio/video wiring to their respective terminal
locations on either the NXA-AVB Breakout Box, Ethernet port, or NetLinx Master.
12.
Reconnect the terminal power connector on the PSN and apply power.
42
Faceplate
482.60
19.00
399.29
15.72
CV17 17" Modero Coor Video Touch Panels
84.03
3.31