Input Commands; Cal; Kps; Vks - AMX MVP-9000i-GB Instruction Manual

Input Commands

These Send Commands are case insensitive.
Input Commands

^CAL

^KPS

^VKS

MVP-9000i - Instruction Manual
Put panel in calibration mode.
Syntax:
"'^CAL'"
Example:
SEND COMMAND Panel,"'^CAL'"
Puts the panel in calibration mode.
Set the keyboard passthru.
Syntax:
"'^KPS-<pass data>'"
Variable:
pass data:
<blank/empty> = Disables the keyboard.
0 = Pass data to G4 application (default). This can be used with VPC or text areas.
1 - 4 = Not used.
5 = Sends out data to the Master.
Example:
SEND COMMAND Panel,"'^KPS-5'"
Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the Master via the Send Output String
mechanism. This process sends a virtual keystroke command (^VKS) to the Master.
Example 2:
SEND COMMAND Panel,"'^KPS-0'"
Disables the keyboard passthru to the Master: Accepts keystrokes from any of these sources: attached USB keyboard or
Virtual keyboard.
Send one or more virtual key strokes to the G4 application. Key presses and key releases are not distinguished except in
the case of CTRL, ALT, and SHIFT.
Refer to theEmbedded Codes table on page 126 that define special characters which can be included with the string but
may not be represented by the ASCII character set.
Syntax:
"'^VKS-<string>'"
Variable:
string = Only 1 string per command/only one stroke per command.
Example:
SEND COMMAND Panel,"'^VKS-'8"
Sends out the keystroke 'backspace' to the G4 application.
Programming
125