Changing Format In Internet Fax Mode - Sharp MX-3050N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
(MX-3070N/MX-3570N/MX-4070N only) To enable OCR, select the [OCR]
12
checkbox (
After the settings are completed, tap (
• Select the scanning language in the language settings.
• When [RTF], [DOCX], [XLSX], or [PPTX] is selected for the file format, you can set the font of the output text.
• When the [Detect Image Direction] checkbox is selected (
image is rotated before transmission.
• When the [File Name Auto Extraction] checkbox is selected (
the file name. If a file name is set, the set file name will be used for transmission.
• When sending to mixed address types, set the OCR settings for each address type.

CHANGING FORMAT IN INTERNET FAX MODE

Change the file format (file type and compression mode) for sending a scanned image in Internet Fax mode.
The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not
support full mode (it only supports simple mode), select [TIFF-S].
When [TIFF-S] is selected, the transmission settings are restricted as follows:
• Resolution: The selections are [200x100dpi] and [200x200dpi].
If [TIFF-S] is selected after [200x400dpi], [400x400dpi] or [600x600dpi] is selected, the resolution automatically changes to
[200x200dpi].
• Send size: Always 8-1/2" x 11"R (A4R).
If [TIFF-S] is selected after the send size is changed, the send size is automatically fixed to 8-1/2" x 11"R (A4R). If a size
larger than 8-1/2" x 11" (A4) is scanned, the size will automatically be reduced to 8-1/2" x 11"R (A4R). When this format is
included in a broadcast transmission, the image will be transmitted to all destinations in 8-1/2" x 11"R (A4R).
• Others: When a ratio setting is selected and the original size is entered, Dual Page Scan, Card Shot, N-Up, Mixed Size
Original, Job Build, or Book Divide cannot be used.
Tap the mode display to switch to the initial screen of Internet Fax mode.
1
► Changing mode from each mode (page 5-9)
Tap the [File Format] key.
2
3
Address Book Address
File Format
File Format
TIFF-S
TIFF-F
Others
) and tap [OCR Setting].
).
Resolution
Touch to input Address
Change Sending Resolution
Exposure
Specify density of image to send.
Internet Fax
Compression Mode
MH (G3)
MMR (G4)
Preview
Receive
reception memory 100%
), the orientation of the original is detected and the
), the text string that is read from the file is included in
Tap the [TIFF-S] or [TIFF-F] key to
specify the file format.
If you selected [TIFF-F], select the compression mode.
After the settings are completed, tap
CA
Start
5-60
.