BEFORE USING THE MACHINE►LOADING PAPER
4
5
Loading paper in the SRA3
When loading paper in the SRA3, follow the steps below to move the control plate auxiliary block.
1
2
Control plate
auxiliary block
Insert the paper into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line (maximum of 550
sheets).
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Remove the control plate auxiliary
block
Attach the control plate auxiliary block
that was removed in step 1
1-66