Sharp MX-3050N User Manual page 766

SYSTEM SETTINGS►USER CONTROL
Disable Billing Code for Selected Applications
The billing code entry window is displayed when the external application that is set to enable is started.
The following settings can be configured.
• Application Name registered as Standard Application
Billing Code Display Name Setting
You can change the main code or sub code name displayed in the billing code entry window or billing code selection
window.
Main Code List
You can display a list of main codes to search for, register, correct, or delete a main code.
• [Search] key
Searches for a main code.
• [Add] key
Adds a new main code.
• List
Displays a list of registered main codes. Selecting each main code displays the window to correct the main code.
• [Delete] key
Set the check box on the left of each main code to
Register a main code
When you tap the [Add] key, the registration screen appears. A total of up to 2,000 main and sub codes can be
registered.
For information on the settings, see
After the setting has been completed, tap the [Submit and Register Next] key; you can continuously register the next
main code. To end the registration process, tap the [Submit] key.
Correct a main code
Selecting a main code from the list displays the window to correct the main code.
For information on the settings, see
After the setting has been completed, tap the [Submit] key; you can apply the corrected contents and complete
processing.
Search for a main code
Enter the main code and main code name, then tap the [Search] key; the search result is displayed.
Settings
Item
Main Code
Main Code Name
Available to
To register a group for specifying a public destination
In "Settings (administrator)", select [User Control] → [Organization /Group List].
, then tap the [Delete] key; the selected main code is deleted.
"Settings (page 7-74)".
"Settings (page 7-74)".
Enter the main code. Specify the code using up to 32 single-byte characters.
Enter the main code. Specify the code name using up to 32 double- or single-byte
characters.
The registered billing codes can only be shared in the specified group.
When not specifying a public destination, select [All Users].
When specifying a public destination, select [Designate Public Address.], then specify a
group to share the billing code.
7-74
Description