Sharp MX-3050N User Manual page 279

COPIER►OTHER FUNCTIONS
Tab copying with a right binding
Originals
Originals
1
Final image
Tab Copy must be specified before scanning the original.
To change the default image shift width for tab copying:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Initial Tab Copy Setting].
The factory default setting is 1/2" (10 mm).
Tap the [Others] key, and tap the [Tab Copy] key.
1
Tap the [On] key.
2
Placing the originals
Document feeder tray
Insert the originals so that the
side with no tab text enters first.
Document glass
1
Place so that the side with the
tab text is on the left.
Load the tab paper so that the tab on the
first sheet is away from you.
2-120
Loading tab paper
Side 2