Print Port Settings; Lpd Settings; Google Cloud Print Settings - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Print Port Settings

LPD
Enter a profile expiring date.

LPD Settings

LPD
Set this option to use LPD.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Banner
Set this option to use the banner. The default setting is "Invalid".
RAW
Raw Print Settings
Raw Print
Set this option to use RAW printing. The default setting is "Valid".
Port Number
Enter a port number. The default setting is port 9100.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Bidirectional
To use bidirectional communication, set to .
WSD
WSD Settings
WSD Print
Set this option to use WSD printing.
Use Multicast Discovery
Set this option to use multicast discovery.

Google Cloud Print Settings

Google Cloud Print
Specify whether or not Google Cloud Print is used.
Always Retain Prints
The retention print function can be enabled in Google Cloud Print.
When this setting is enabled, Google Cloud Print jobs are saved in the "Main Folder" of document filing.
When disabled, the machine starts printing immediately after reception of a Google Cloud Print job.
Status
"Not Set", "Registering", "Registered", or "Offline" will appear.
E-mail
The e-mail address of the Google account of the user that registered the machine appears.
Device Name
Set the device name that appears on the client device.
This setting is the same as the device name on the machine information page of the status.
7-140