Zone Settings; Zone (Zone Switch); Int Sw (Internal Switch); Transmit Ch (Transmit Channel) - Yamaha Montage 7 Reference Manual

Reference
Performance

Zone Settings

From the Zone Setting display you can set Zone-related parameters.
You can divide the keyboard into a maximum of eight independent areas (called "Zones"). To each Zone
can be assigned different MIDI channels. This makes it possible to control several Parts of the multi-timbral
tone generator simultaneously by a single keyboard or to control Parts of an external MIDI instrument over
several different channels in addition to the internal Parts of this synthesizer itself—letting you use the
MONTAGE to effectively do the work of several keyboards.
To activate this display, select [UTILITY]  [Settings]  [Advanced], then set "Zone Master" to "ON."
For details, refer to the Owner's Manual.
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON] 
Operation
[Part Settings]  [Zone Settings]

Zone (Zone Switch)

Determines whether the Zone function is used (on) or not (off). When this is set to off, all of the following
parameters are not available.
Settings: Off, On

Int SW (Internal Switch)

Determines whether MIDI messages generated by playing the keyboard in the range of the selected Zone
are transmitted to the internal tone generator or not.
Settings: Off, On

Transmit Ch (Transmit Channel)

Determines the MIDI Transmit Channel for the selected Zone.
Settings:
Ch1 – Ch16, Off
Note Limit
Determines the lowest and highest notes of the range for the selected Zone. The selected Zone will sound
only when you play notes within this range. If you first specify the highest note and then the lowest note, for
example "C5 to C4," then the note range covers both "C-2 to C4" and "C5 to G8."
Settings:
C -2 – G8
Octave Shift
Determines the amount in octaves by which the range of the Zone is shifted up or down. You can adjust the
offset up or down over a maximum range of three octaves.
Settings:
-3 – +0 (Default) – +3
Transpose
Determines the amount in semitones by which the range of the Zone is shifted up or down.
Settings:
-11 – +0 (Default) – +11
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
63