Audio Signal Flow; Midi Signal Flow; Standalone; Midi Rec On Daw - Yamaha Montage 7 Reference Manual

Reference
Performance

Audio Signal Flow

Indicates the Audio signal connections. The connections will change depending on the status of the [USB
TO HOST] terminal and the general settings of the instrument.

MIDI Signal Flow

Indicates the MIDI signal connections. The connections will change depending on the general settings of
the instrument.
Quick Setup
Determines the Quick Setups.
Settings:
Standalone, 1 – 3
The parameters for Quick Setups are as follows.
Audio Settings
MIDI Settings
Part Output Settings
For details about parameters related to Audio Settings, see "Audio I/O"
parameters related to MIDI Settings, see "MIDI I/O"
The default settings for Quick Setups are as follows.
 Standalone
Use this setting when this instrument is to be used alone or as the master clock source for other
equipment.
Local Control
On
 MIDI Rec on DAW
Use this setting when recording this instrument's performance (not including Arpeggio data) to the
DAW software.
Local Control
Off
 Arp Rec on DAW
Use this setting when recording this instrument's performance including Arpeggio data to the DAW
software.
Local Control
Off
MONTAGE Reference Manual
Edit
A/D Input Gain
Main L&R Gain
Assign L&R Gain
USB Main L&R Gain
USB 1-30 Gain
Direct Monitor Switch
MIDI In/Out
Local Control
Arp MIDI Out
MIDI Sync
Clock Out
Receive/Transmit Sequencer Control
Controller Reset
FS CC Number
Part 1-16 Output Select
A/D In Output Select
Digital In Output Select
Direct Monitor Output Select
On Main L&R
Direct Monitor Output Select
On Main L&R
Direct Monitor Output Select
On Main L&R
Search
(page 168). For details about
(page 169).
Arp MIDI Out
Off
Arp MIDI Out
Off
Arp MIDI Out
On
Utility Live Set
Uitlity
Settings
Sound
Quick Setup
Audio I/O
MIDI I/O
Advanced
System
Contents
Load
Store / Save
Data Utility
Tempo Settings
Effect Switch
167